Model ZV-S306 is a high-performance dual stream MPEG-4, MJPEG, low-cost video encoder that provides instant network connectivity to any existing analog camera. Easy to deploy and configure, the ZV-S306 enhances any CCTV installation by offering remote audio and video monitoring capabilities over the LAN, WAN, or Internet. Up to D1 high resolution is available along with RS-485 for PTZ control. Other features include an alarm input/relay output, E-Mail or FTP pre- and post-alarm JPEG snapshots, Password access, and adjustable bandwidth, resolution, and image size. The best value around for remote viewing.

$245.00

The one-channel AXIS M7001 Video Encoder offers a highly compact design with superb H.264 performance. It provides an easy and cost-effective solution for integrating small or large numbers of analog CCTV cameras into an IP-based video surveillance system. The palm-sized, standalone AXIS M7001 is designed for installation close to an analog camera. It supports all types of analog cameras including PTZ (pan/tilt/zoom) and PTZ domes. AXIS M7001 can deliver two simultaneous video streams, one in H.264 and another in Motion JPEG, at full frame rate in all resolutions up to D1 (720x480 in NTSC, 720x576 in PAL). The H.264 video compression format drastically reduces bandwidth and storage requirements without compromising image quality. Motion JPEG is supported for increased flexibility. The video encoder also provides video motion detection. AXIS M7001 is powered over Ethernet using the same cable as for data transmission (PoE), which simplifies installation.

$280.00

The AXIS M7014 Video Encoder is a compact and easy-to-use 4-channel video encoder with great video performance. It can simplify migration to network video without upgrading existing camera systems. AXIS M7014 provides edge storage through a microSDHC memory card slot. It supports all types of analog cameras including PTZ (pan/tilt/zoom) and PTZ domes. The video encoder features both RS-422 and RS-485 for controlling analog PTZ cameras. The AXIS M7014 can deliver two simultaneous video streams, one in H.264 and another in Motion JPEG, at 15 frames per second in resolutions up to D1 (720x480 in NTSC, 720x576 in PAL). The H.264 video compression format drastically reduces bandwidth and storage requirements without compromising image quality. Motion JPEG is supported for increased flexibility. AXIS M7014 is powered over Ethernet (PoE) using the same cable as for data transmission, which simplifies installation. A power supply is also included in the package.

A great value with the lowest cost per channel over other units.

$469.00

ONVIF COMPLIANT! The new Samsung SPE-400 4 channel network video encoder makes your life easier since it supports standardized ONVIF protocol. This offers the perfect hybrid solution for users looking to upgrade their control, management and recording equipment to an IP platform, but take advantage of existing analog camera technology and cabling infrastructure. The SPE-400 enables images to be transmitted in real-time at 4CIF resolution and includes a multi-streaming feature giving the user a host of viewing and recording options. Triple codec allows streaming of h.264, MPEG-4, and MJPEG compression formats. Other cool features include a SD/SDHC memory card slot, 30fps transmission speed, bi-directional audio transmission, RS-485 data transmission for PTZ control, and various event triggers. The SPE-400 is a feature packed video IP encoder from a respected technology company at an economy price. 12VDC or PoE.

$620.00

The WJ-GXE500 Network Video Encoder is part of the Panasonic i-PRO SmartHD lineup. It is a Power over Ethernet (PoE) IEEE802.3af, 4-channel encoder that uses less than half the power consumption of equivalent models. The WJ-GXE500 also uses the Panasonic proprietary UniPhier® System LSI that is compliant with the H.264 High Profile standard format and makes it possible to stream video over the network at a lower data size. The dual codecs (h.264, JPEG) transmit at D1 resolution. The motion adaptive conversion allows clear pictures, even when the subject is moving. Other great features include an SD/SDHC card slot for manual recording, alarm recording and network failures, bi-directional audio, up-the-coax control of Panasonic PTZ cameras, RS-485 support for other brand PTZ cameras, face detection and various event triggers. The WJ-GXE500 is compact and works with PoE or 12VDC.

$559.00

The SNT-EP104 is a compact, high-performance 4 channel Video Network encoder that allows users to remotely monitor analog cameras over a TCP/IP network or to record cameras on a compatible network video recorder (NVR). The unit accepts up to four analog video inputs providing outstanding flexibility for IP-based monitoring systems. The dual stream codec encodes MPEG-4, JPEG and H.264 compressed images at a high-refresh rate of 30 fps (NTSC) at D1 resolution. Outstanding new image enhancement features include:

Visibility Enhancer
The SNT-EP104 Series includes Visibility Enhancer technology. This tone-correction technology optimizes the visibility of a scene by increasing brightness in darker areas of the scene and compressing the brighter areas. The result is sharper, clearer images and a higher level of visibility - all of which are critical for security surveillance.

XDNr (eXcellent Dynamic Noise reduction)
Incorporating newly developed XDNR technology, the SNT-EP104 can provide clear images while at the same time minimizing motion blur under low illumination. What’s more, when both XDNR and Visibility Enhancer are turned on, the video encoders can achieve four times the sensitivity compared to when they are off. This technology is ideal for any outdoor surveillance monitoring, such as a car parked at night.

Dynamic Frame Integration (DFI)
Incorporating Dynamic Frame Integration (DFI) technology, the SNT-EP104 can reproduce clear images that contain both still and moving objects. DFI technology detects movement within the image and reproduces those areas with minimal blurring, while - at the same time - areas with little or no movement are displayed naturally with minimal jagged edges. DFI also ensures clear images in low light conditions.

$689.00

The AXIS M7010 Video Encoder is an easy-to-use 16-channel video encoder with great video performance. It can simplify migration to network video without upgrading existing camera systems. The AXIS M7010 provides edge storage through four microSDHC memory card slots. It supports all types of analog cameras including PTZ (pan/tilt/zoom) and PTZ domes. The video encoder features both RS-422 and RS-485 for controlling analog PTZ cameras. The AXIS M7010 can deliver two simultaneous video streams, one in H.264 and another in Motion JPEG, at 15 frames per second in resolutions up to D1 (720x480 in NTSC, 720x576 in PAL). The H.264 video compression format drastically reduces bandwidth and storage requirements without compromising image quality. Motion JPEG is supported for increased flexibility. It is powered over Ethernet (PoE) using the same cable as for data transmission, which simplifies installation. A power supply is also included in the package.

A great value with the lowest cost per channel over other units.

$1,879.00