Great for mag locks, electric strikes and cameras requiring 12 VDC power with a battery backup.
- UL Listed - U.S. and Canada Access Control (UL294).
- NFPA 101 (Life Safety)
- 120VAC input (AC tail required - available at most hardware stores)
- Two (2) 12VDC or 24VDC, class 2 rated power limited outputs.
- 1 amp continuous supply current.
- Filtered and electronically regulated output.
- Built-in charger for sealed lead acid or gel type batteries.
- Maximum charge current: 400mA.
- Automatic switch over to stand-by battery when AC fails.
- AC power and unit status indicator on the front panel.
- Normally Open [NO] trigger input.
- Fire Alarm Disconnect (Latching w/reset or Non-Latching).
- Includes power supply, transformer and enclosure (8.5"H x 7.5"W x 3.5"D).
- Accepts (1) 12VDC/7AH battery.

$72.00

Recommended for most access control applications, this DC power supply will power up to three (or more) electric strikes or mag locks (check manufacturers current requirments).
- UL Listed
- 12VDC or 24VDC field selectable power limited outputs.
- Two (2) 12VDC or 24VDC, class 2 rated power limited outputs.
- 1.75 amp continuous supply current
- 120VAC input (AC tail required - available at most hardware stores)
- Aux. Relay output
- AC Fail output relay
- Latching fire alarm interface relay with reset
- Includes large enclosure, transformer and cam lock
- Accepts (2) 7 AH 12VDC batteries
- Size: 13"H X 13.5"W X 3.25"D

$125.00

The P3DC12-4-3 is a 4 channel DC power supply and distribution module from Preferred Power Products (P3), the new standard in power supplies. With a fresh innovative design, the feature packed P3DC12-4-3 has 4 individually fused outputs for powering CCTV cameras or access control devices.

- Input 115VAC 50/60 HZ 1.0 Amp
- 3 Amps 12VDC continuous supply current
- Four 12VDC individually fused outputs
- Output fuses are rated at 3 Amps
- Main fuse is rated at 5 Amps
- Surge protected outputs
- DC power LED indicator
- Individual LED’s for each output
- Power ON/OFF switch
- Spare fuses included
- Unit maintains camera synchronization
- Battery standby capability - enclosure accepts (1) 4.5ah 12VDC battery (not included-see below)

$85.00

The P3DC12-8-3 is a 8 channel DC power supply and distribution module from Preferred Power Products (P3), the new standard in power supplies. With a fresh innovative design, the feature packed P3DC12-8-3 has 8 individually fused outputs for powering CCTV cameras or access control devices.

- Input 115VAC 50/60 HZ 1.0 Amp
- 3 Amps 12VDC continuous supply current
- Eight 12VDC individually fused outputs
- Output fuses are rated at 3 Amps
- Main fuse is rated at 5 Amps
- Surge protected outputs
- DC power LED indicator
- Individual LED’s for each output
- Power ON/OFF switch
- Spare fuses included
- Unit maintains camera synchronization
- Battery standby capability - enclosure accepts (1) 4.5ah 12VDC battery (not included-see below)

$96.00

The 12VDC-9P/5A is a economically priced 9 channel DC power supply and distribution module with a 5A total output capability. This is plenty of power to supply 9 infrared cameras that are rated at 550mA or less. No frills reliable power at a bottom dollar price.

- Input 115VAC 50/60 HZ 1.0 Amp
- 5 Amps 12VDC continuous supply current
- Nine 12VDC individually fused (PTC) outputs
- Individual output fuses are rated at 3 Amps
- Individual LED’s for each output
- Power ON/OFF switch
- Power tail included
- 9.8"H X 8.3"W X 3.5"D metal enclosure

$75.00

$87.00

The same economical power supply as the 12VDC-9P/5A above only it has twice as much power capacity (10 amps) delivered to 9 auto reset outputs.

$99.00

The same economical power supply as the 12VDC-9P/5A above only it has twice as much power capacity (10 amps) delivered to 16 auto reset outputs.

The P3DC12-16-5 is a 16 channel DC power supply and distribution module from Preferred Power Products (P3), the new standard in power supplies. With a fresh innovative design, the feature packed P3DC-16-5 has 16 individually fused outputs for powering CCTV cameras or access control devices.

- Input 115VAC 50/60 HZ 1.5 Amp
- 5 Amps 12VDC continuous supply current
- Sixteen 12VDC individually fused outputs
- Output fuses are rated at 3 Amps
- Main fuse is rated at 5 Amps
- Surge protected outputs
- DC power LED indicator
- Individual LED’s for each output
- Power ON/OFF switch
- Spare fuses included
- Unit maintains camera synchronization
- Battery standby capability - enclosure accepts (1) 4.5ah 12VDC battery (not included-see below)

$119.00

Recommended for most access control applications, this DC power supply will power many electric strikes or mag locks (check manufacturers current requirments).
- Class 2 rated, UL listed
- 12VDC or 24VDC power limited selectable output
- (5) individual PTC protected outputs
- 4 amp continuous supply current @12VDC
- 3 amp continuous supply current @ 24VDC
- 120VAC input (AC tail required - available at most hardware stores)
- Fire alarm panel or access control trigger input N.O. - see spec sheet for details
- AC fail monitoring
- Low battery monitoring, battery presence monitoring
- Accepts (2) 7 AH 12VDC batteries
- Includes large enclosure and transformer and cam lock
- Size: 13"H X 13.5"W x 3.25"D

$205.00

$18.00