Pro
Security Warehouse
|
|
|---|---|
 |
|
|
|
|
|
|
|||
|
 |
SECUREMAX: CP-2420 24 VAC - 20VA POWER TRANSFORMER | |
|
Class II Plug-In type transformer with LED, 120 VAC input, 24 VAC output, 20 VA. (20 watts). Sufficient to power one CCD camera (fixed). Not to be connected to a housing with a heater installed. Indoor use only. UL listed.
Picture may vary slightly from actual unit. |
||
|
24VAC
- 20VA |
|||
|
Usually
ships within 24-48 hours |
Recommended components: multi camera power supplies | ||
|
|||
|
|||
|
|
SECUREMAX: CP-2440 24 VAC - 40VA POWER TRANSFORMER | |
|
Class II Plug-In type transformer with LED, 120 VAC input, 24 VAC output, 40 VA. (40 watts). Indoor use only. UL listed.
Picture may vary slightly from actual unit. |
||
|
24VAC
- 40VA |
|||
|
Usually
ships within 24-48 hours |
Recommended components: multi camera power supplies | ||
|
|||
|
|||
|
|
SECUREMAX: CP-2450 24 VAC - 50VA POWER TRANSFORMER | |
|
Class II Plug-In type transformer with LED, 120 VAC input, 24 VAC output, 50 VA. (50 watts). Indoor use only. UL listed.
Picture may vary slightly from actual unit. |
||
|
24VAC
- 50VA |
|||
|
Usually
ships within 24-48 hours |
Recommended components: multi camera power supplies | ||
|
|||
|
|||
|
|
SECUREMAX: CP-1640 16 VAC - 40VA POWER TRANSFORMER | |
|
Class II Plug-In type transformer with LED, 120 VAC input, 16 VAC (16.5) output, 40 VA. Widely used for all security alarm systems panels. Indoor use only. UL listed.
Picture may vary slightly from actual unit. |
||
|
|
|||
|
Usually
ships within 24-48 hours |
Recommended components: | ||
|
|||
|
|||
|
 |
SECUREMAX: DC-500R 12VDC 500mA REGULATED POWER SUPPLY | |
|
Plug-In type regulated switching DC Power Supply, 120 VAC, 12 VDC, 500mA, 2.1 mm. coax plus, UL Listed. Regulated power supply maintains constant voltage up to the rated load (.5 amp). Good for DC cameras and IR cameras with less than 36 LEDs, keypads and other 12 volt equipment. | ||
|
|
|||
|
Usually
ships within 24-48 hours |
|||
|
|||
|
|||
|
|
SECUREMAX: PA1.25A 12VDC 1250mA REGULATED POWER SUPPLY | |
|
Plug-In type regulated switching DC Power Supply, 120 VAC, 12 VDC, 1250mA (1.25A), 2.1 mm. coax plus, UL Listed. Regulated power supply maintains constant voltage up to the rated load (1.25 amp). Recommended for DC cameras equipped with larger Infrared Illuminators (IR), keypads and other 12 volt equipment. | ||
|
|
|||
|
Usually
ships within 24-48 hours |
|||
|
|||
|
|||
|
|
SECUREMAX: W-T2000 12VDC 2000mA REGULATED POWER SUPPLY | |
|
Plug-In type regulated switching DC Power Supply, 120 VAC, 12 VDC, 2000mA (2A), 2.1 mm. coax plug, UL Listed. Regulated power supply maintains constant voltage up to the rated load (2 amp). Recommended for DC cameras equipped with very high power Infrared Illuminators (IR) or heaters. | ||
|
|
|||
|
Usually
ships within 24-48 hours |
|||
|
|||
|
|||
|
 |
ECLIPSE: ECL-2AD 24 Volt AC to 12 Volt DC CONVERTER | |
|
This "life saver" AC to DC converter is a device used by the pros that enables you to use one (or more) 12 VDC powered cameras with the more common 24VAC multi-camera power supplies. Great for applications where most of your cameras are 24VAC but you need one or a few bullet or infrared type cameras (12VDC) and would like to power everything off of the same power supply. This converter has a steady regulated output and can handle 12VDC cameras with a current draw of 500mA or less (most cameras except the larger IR cameras). Has a 2.1mm camera power plug on one end and a screw terminal for the 24VAC power input at the other end. 24" long. Simple and effective. (photo may vary). | ||
|
|
|||
|
Usually
ships within 24-48 hours |
Recommended components: 24VAC Multi-camera power supplies | ||
|
|||
|
|||
|
|
ALTRONIX: VR1 24 Volt AC to 12 Volt DC CONVERTER | |
|
The Altronix VR1 is similar to the PC300 above but is made for equipment requiring more power. With a 1 amp continuous output, this 24VAC to 12VDC converter will work perfectly with the greater power requirements of Infrared cameras and other electronic equipment (including mag locks, fiber optic transceivers, PIRs, card readers etc.). Don't be afraid to connect sensitive electronics, this unit is fully regulated and filtered. Modular construction with a detachable cable harness makes for an easy installation. Built-in overload protection. The Altronix VR1 has a lifetime warranty! Dimensions: 1.625"L x 2.375"W x 1"H. |
||
|
|
|||
|
Usually ships within 24-48 hours |
Recommended components: 24VAC Multi-camera power supplies | ||
|
|||
|
|||
|
|
SECUREMAX: AT12015 24 Volt AC to 12 Volt DC CONVERTER 1.5A | |
|
The Securemax AT12015 is a 24VAC to 12VDC regulated voltage converter that is capable of powering the large IR cameras, PTZ cameras or other devices requiring 12VDC where only 24VAC is available. This converters' small size allows it to fit inside most typical camera housings yet packs the largest current output capability we have seen - 1.5 amps. Quick disconnect terminals. Dimensions: 2.5"L x 1.125"W x .875"H. |
||
|
|
|||
|
Usually ships within 24-48 hours
|
Recommended components: 24VAC Multi-camera power supplies | ||
|
|||
Can't find what your looking for? We have hundreds of additional products not listed on the web site for great prices! Click here for info on more stuff.
